Tuesday, 3 December 2013

OUGD504 - Design for Print - Final critique

OUGD504 - Design for Print - Final critique

I have not quite finished my work, however, I took part in a final critique today, which was anonymous.

Here are the questions I asked:


  1. What do you think about my choice of stock for the big circular design?
  2. Do you think that this is a feasible product?
  3. Your general comments on the overall design - be as honest as you can!
  4. Do you think that the mismatching colours are a problem? Did you notice before I pointed it out?
1st person:
'I think that the aesthetic of the design is really appropriate to the concept and the construction. The colour combos and fonts work well with the patterns and composition. The navigation and usability is a little confusing, though. I found it hard to access info on particular areas without having to get used to the product first. I think it's an engaging concept that is fun to use but falls down somewhat on the logical organisation of information. Also consider what info is included - is more needed to fully understand print?'

2nd person:
'**Flourescent > Fluorescent**
  1. I think it is durable but would like to see it folded to see if any white would show.
  2. As an information pack it is unique, it still answers the brief, there is a list of processes and how to do them, to an extent.
  3. As a feasible product on the market, I don't think it's obvious what it is at a glance... Maybe if it was in a 'box' and had clear information about print, then you have to fold the structures yourself, it would make the product more 'hands on' and 'fun'.
  4. I think that it is very feminine and for a target audience of 16-20's - slightly arabic?!
  5. I didn't notice, but now it has been drawn to my attention it maybe does lack some consistency.
3rd person:
  1. 'Stock works very well with the type and colour choices
  2. Different approach to the brief than others which makes it engaging but may not be informative enough - the content is enjoyable but not sure it fits the 'info pack' criteria.
  3. Can see from the prototypes that it is feasible and looks like you have thought a lot about the construction.
  4. Design is well constructed but you may not have spent enough time on the content - it looks like a game but if the content was more informative it would work in your favour in this context.
  5. Didn't notice the mismatched colours and think they work well and compliment each other.


Monday, 2 December 2013

OUGD504 - Design for Print - Problems and resolutions with choice of stock (again)

Design for Print - Problems and resolutions with choice of stock (again) 

So, after the initial problem of getting the stock I needed (off white A1 card stock) I finally picked it up this weekend - it looks great!

I have 10 sheets of A1 Ivory coloured 330 gsm card and 4 sheets of 330gsm in a turquoise-y colour. Unfortunately the turquoise isn't what I originally envisioned, and I realise that turquoise is brighter and bluer than the colour I was thinking of - teal! Nevertheless, this colour looks great and although I'm changing my design, I think that it still looks just as good.

After this weekend, I decided to digitally print most of my project in order to reduce the amount of screens used for practical reasons. This includes the background colour and the words on the interior of the octagon box.
I need the turquoise printed on the ivory card to match the colour of the turquoise stock so the whole pack co-odinates. I got a Pantone reference guide and got a perfect match!
I knew that because the chosen stock wasn't bleach white that the turquoise wouldn't come out exactly the same colour - but so long as it was the closet match possible.




Problems have occurred when advised by James down in the Digital Print Room - he said he thinks that the turquoise would not only not be the same, but appear almost green and completely mis match the colour of the stock. He said that the only way to know is to test it and find out - or mock it up on the computer. 

We placed an overlay of the same colour of stock on the design on Illustrator - and found that there was no real way to get the colour to match - he said the only way to get the exact turquoise colour on the stock is to SCREEN PRINT!

I know that this isn't an option I want to go back to, I have asked a few of my peers what they thought and a few tutors and they thought that I should just digital print it and talk about how I could take the project further in my evaluation. But I didn't want to waste my nice stock on something that wasn't as perfect as it could be!

I have decided that I am going to buy more card stock in bleach white and fake the colour of the stock by printing a Pantone match in the background!

I'm really annoyed that the stock problems have set me back a week, and yet I have ended up not using the special stock at all. I'll have to use my posh stock another time....

Friday, 29 November 2013

OUGD504 - Design for Print - Screen printing final designs

Design for Print - Screen printing final designs

Friday 29th November 2013


This morning I went to the drop in digital print session to print off my positives for my screens. It came to £12 just for this part and so I'm beginning to doubt whether this is such a good idea.


Screens:



A1 both the rose lid box and the smaller butterfly box


A1 Exterior of the Octagon




A1 Swirls and lined border - Metallic ink


A1 illustrations and stars to be foiled in gold


A3 foiling and flocking for the inner card design


A1 interior words and border of the octagon 


I started to prepare my screens for printing on Monday. I started off with 6x A1 screens as I saw that they were free and so grabbed as many as possible. 

As you can see there is a hell of a lot of screens, and so I decided this morning to only prepare 3 to start with, and have a rethink about how many I would need realistically over the weekend, as 6 is a lot of money, time, effort and heightens the difficulty and therefore quality of the outcome and so there's more to go wrong, I was advised by the staff member supervising me.

I prioritised the 'foiling' screen, the  'swirls' screen and the 'boxes' screen design. This is because these are the screens that use the effects that can only be achieved using screen printing.  


I didn't realise how long just 3 screen would take me to clean and coat - 3 hours! They have to be left for at least an hour to dry the emulsion and I have to get a train in 20 mins so the exposing will have to wait until Monday!


Sunday 1st December 2013

I've decided to do the majority of the project digitally and add the finishing processes that can only be produced using screen printing in this way, otherwise, we're talking about 7 screens!!

I have finally become united with my chosen stock, and, combined with the disaster of the the inner card misprint, means I can take a good look at the colour of the turquoise card stock and try to match it with my on screen choices to get the colour scheme perfectly calibrated! 

Monday 2nd December 2013 

Because of the problems with stock this morning, I have gone back to just plain white A1 card stock. Irritating and time wasting, but at least I have a comprehensive solution! FINALLY!


Thursday, 28 November 2013

OUGD504 - Design for print - laser cutting the boxes

Design for print - laser cutting the boxes

28th November 2013

I decided it would probably be best if I were to laser cut the black boxes BEFORE I print on them with screens/ hand print because it will be easier to register without pencilling onto the stock.

(The black boxes are the 'rose' boxes)

It took me around THREE hours to laser cut these as there were problems with the laser cutter - it kept freezing up and I couldn't figure out why. I resolved the problem by being patient with the machines and not rushing them!

One of the final cut out boxes:




I made about 6 (I want 4 in total) to leave room for errors with screen printing.

I need to decide whether I should laser cut the other designs before or after I screen print - there is no easy way of registering the artwork with the octagon since the design is complicated and the net is symmetrical so I would depend on registration marks around the artwork to align different layers. However the smallest box could probably be laser cut first.


Wednesday, 27 November 2013

OUGD504 - Design for print - Problems and resolutions with the inner card

Design for Print - Inner Card Design - Resolving Design Problems 

So, after digitally printing around 30 inner card final designs double sided, I come to realise upon assembly of one of them, that I HAVE DONE IT WRONG!

As opposed to going like this ....







...it goes like this...







!!!!!!!



...despite me doing it correctly on all of my previous mockups, and writing a little reminder to myself to make sure the panels were correctly arranged!
This is because in all of my mockups etc I have printed off 2 sheets of paper and stuck them together as opposed to printing double sided so I have cut it out and stuck it correctly.

This feels like a major setback as I don't feel like I have time to sort this out!

I know what I have to do - just change the panels around, but this moment of panic also gives me doubts about my design that I didn't even know I had problems with before.

Because it's double sided - this affects the finishing effects that I intended to apply - on the 'unveiling' page I wanted to have flocking on it but because of the calculations the page with the foil on it is the reverse, meaning 2 effects are on the same piece of paper. Because they require different temperatures and lengths of time under the heat press to develop, could this mean that they either burn/ melt or don't develop at all?

I sought the advice of Andy from the Blenheim print room, the main campus for foiling/ flocking. He said that he sees no problem in this but only compromise the temperature/ time to attend to both processes.

Danielle also told me that the thermochromatic ink design that I had created was not suitable for the thermochromatic ink that they provide at the Vernon St campus, as it did not act as a mask, how I had designed it to be. I could purchase thermo ink online, but I didn't know enough about each individual products/ brands to be confident to experiment and would rather use it under the guidance of the staff. I asked the staff at the Vernon Street campus, Neil and Sarah, what they think that my resolutions could be.

They said that to achieve the 'heat to reveal' effect, the thermo ink would have to be the negative space around the lettering and be EXACTLY the same shade and registered perfectly. This sounds super difficult, and now I'm racing against time. I can either do this option, just do a colour change ink effect instead, or not do it at all and put a different effect in the pass the parcel. 

I decide I'm just going to do a colour change, as it's still relevant and it's not nearly as difficult!

So, digital print is booked for Monday at 3.00pm to reprint all of the inner card designs, I have changed the panels and bought all of my materials!

Monday 2nd December 2013

Because of the problems with stock this morning, I have changed all of the colours of the inner card design and bought different stock to print it on at 3pm. Hopefully this print will be successful!


OUGD504 - Design for print and web - session 1 - rewritten brief

Design for Print and Web - Reconstruction of the brief - session 1

My 3 Chosen briefs from the selection from ISTD:

  1. 2010 project 4
  2. 2009 project 2
  3. 2009 project 1

I highlighted all of the key words - including some of the vague ones - to really get a grasp on what the briefs were asking me to actually do!





And from this it became apparent which one was my favourite: 2010 project 4.

After highlighting all the key words from the 3 briefs from the selection from ISTD; we began to analyse and deconstruct them using a series of questions/ statements.

5 Problems that the brief proposes I solve:

  1. How can you make reading relevant to the lives of people who don't usually take the opportunity to do so?
  2. How can you install a typographics piece in a public space without it becoming a piece of graffiti or visual pollution?
  3. How can you stimulate the thoughts of a really broad audience? IE 'Residents and visitors of all ages'
  4. How can you incorporate narrative/ lyrics to the public space in which they're installed?
  5. How can you turn typographic narratives into a spectacle?


5 Facts about the subject and content:

  1. It must celebrate reading in the 21st century
  2. Must engage 'residents and visitors of all ages'
  3. Must not become visual pollution!
  4. Must be incorporated into the surroundings/ space in which they're installed.
  5. Must consider how the readers engage with the text.


5 Facts about the intended audience:

  1. They may not have the opportunities to read on a regular basis.
  2. Their age range is very broad.
  3. They regularly travel around in public spaces as a pedestrian.
  4. They are willing to 'be lead on a journey of discovery' - does this mean they aren't very busy?
  5. They may own technology capable of processing apps such as augmented reality - iPhones / iPads - does this give them a certain financial status? Does this cancel out the idea of reading for all?


5 Things you want to communicate in this brief?:

  1. That reading can be 'fun' for everyone of all ages.
  2. That by utilising new technologies you can turn the street into an art space.
  3. The marrying of the stories/ lyrics with the chosen location / surroundings.
  4. The idea of typography as art for everyone.
  5. The idea of performance art can be understood and appreciated by everyone.
Things I don't know about this brief that I need to find out:
  1. How to design for Augmented Reality.
  2. How I could project onto buildings?!
  3. Where I would be able to place the installation in relation to the story and surroundings.
  4. How to engage such a wide audience.
  5. How much I am allowed to propose and how much I can actually execute successfully.
  6. Whether an older audience with the interpretive technology would care to engage with the installation and whether a younger audience who would care to engage but not have the interpretive technology of Augmented Reality.
  7. How am I going to realistically show my work/ ideas?
Ideas for products of this brief:
  • Augmented Reality iPhone/ iPad App
  • Light projection installations
  • Chalk drawings
  • Natural green moss graffiti
  • Power washed dirt
Because we deconstructed and really thought about the brief and it's suitability to our limitations and new understandings we then decided to re-write our briefs:

BRIEF TITLE
City Canvas

THE BRIEF
Design and create a public typographic installation that will engage a large audience.

CONCEPT / PREPOSITION
A series of preposed light projected installations for around a street space with a GPS orientated Augmented Reality App that the audience can use

BACKGROUND / CONSIDERATIONS
It must not create visual pollution/ litter/ graffiti in the chosen area and so must not be permanent or damaging in any way. It must engage a broad audience in a visually stimulating, unusual manner. It must work with the surroundings not just ergonomically but also subjectively/ contextually.

TARGET AUDIENCE
Residents/ commuters/ visitors of the chosen area that don't have the opportunity to read on a regular basis. They often travel as pedestrians through public areas. They may own iPhones/ iPads and so have a certain financial and social background.

TONE OF VOICE
Friendly, fun and easy to understand as it will be read by a widespread audience of people of all ages whilst they pass by. 

MANDATORY REQUIREMENTS
Fully planned concepts mocked up so that they are fully understandable and that can be proposed further. Possibly even a working Augmented reality installation to demonstrate how the installation would work.

DELIVERABLES
A working Augmented Reality installation and a series of design boards showing all proposals.

Thursday, 21 November 2013

OUGD504 - Design for Print - Preparing and Planning to Print and Sourcing stock

Design for Print - Preparing and Planning to Print

21st November 2013

Because this is such an ambitious project - the preparing of the printing has taken half a day in itself! 

Facilities breakdown in chronological order:

1.Digital Print

  • Octagon design - Border, Turquoise Background, centre with words, and registration marks.
  • Inner Card design - double sided complete design with registration marks.

2.Screen Print

Paper Screens

  • Rose box complete design & butterfly box complete design A1
  • Octagon - gold swirls A1


Fabric Screens

  • Foil and Flock inner card A3
  • Illustrations and stars Octagon A1


3.Laser Cutter

  • Octagon - Cut through stars and registration marks, score through folds.
  • Rose box - cut through stars and around design and score
  • Butterfly - cut around design and score


ADD REGISTRATION MARKS TO EVERYTHING!

***AMENDED : CANNOT PRINT DOUBLE SIDED A1 IN DIGITAL PRINT!***

I totally forgot that you can't print double sided a1 in digital print!

My peers say that I should screen print the whole thing. This sounds like a lot of work, but will the outcome be worth it? 

This would mean :
  • 4 x a1 Paper screens
  • 1 x a1 fabric screen
  • 1 x a3 fabric screen


Sourcing stock

Stock needed (doing 4 complete Posh Pass the Parcels in total)

4x A1 Antique white stock - at least 330 - 400 gsm
2x A1 black card stock around 330 gsm
1xA1 (turquoise maybe?) or antique white stock

25th November 2013

***AMENDED : CANNOT BUY A1 ANTIQUE WHITE CARD IN THE LIBRARY!***

Further research reveals that it's not a very common item - but bleach white is. If I can get antique white / off white/ ivory / cream stock then I will go with that because bleach white doesn't really suit the 'posh' theme of the pack. 

I phoned my Dad, who works at a large scale printing company to see if he could help me out, as because it's such an uncommon item I would have to order it - at least 25 sheets from the likes of GF Smith that I can't afford and don't need that many!

Success! He managed to get me 10 sheets of a1 cream/ ivory card stock around 330 gsm and 3 sheets of turquoise. This is so useful but I won't be able to get it off him until the weekend which delays my printing plans for nearly a whole week.

Because of my trouble with stock I'm getting on with the things I am able to do. I printed off the inner card design on cream stock as it's only a3, and I've booked a laser cutter session for Thursday to cut out the Rose box design.

Because the Rose Box design is on card stock, I thought it would be easier having it cut out first to be able to register with my screen design. 

You can see the laser cutting of the boxes here.